Free Onsite Quote 0401 446 448

colorbond roofing contractors perth

Complete Residential Re-roofing Services

Re-Roofing is the process of installing a new roofing system in place of an existing roofing system and the experienced team at Steve’s Metal Roofing offer a great range of re-roofing services for both home and commercial buildings throughout Perth. If you have an existing tile roof, we can offer a re-roofing using quality Colorbond that will look great and add value to your home.

Re Roofing PerthThere are a number of factors that can require a roof to be repaired or replaced. Age and damage from weather are the most common factors, but poor roof design and bad installation can also dramatically reduce the life of a roof.

By detecting areas of weakness and potential failure, the risk of water penetration can be greatly reduced, lowering if not preventing costly further repairs. In some cases, repairs can be performed, extending the current life of the roofing system. With over 20 years of roofing experience we can often find potential problems before they become a serious issue.

Steve’s Metal Roofing will undertake a complete inspection to develop a maintenance schedule and budget for future years to come - avoiding being hit with a large renovation expense without former financial preparation.

Our re-roofing process:

  1. It begins by our roofing & guttering tradesmen precisely measuring your roof and guttering to reduce waste, save time and to provide the best price with no “hidden” extras.
  2. If required, safety guard rails are installed as per Workplace Health & Safety guidelines, our duty of care to our tradesmen and our insurance requirements.
  3. The existing roof is then removed one manageable section at a time, to make certain that your home is left weatherproof and secure for the duration of the work.
  4. As the roof is removed, the timber structures of the roof are checked and any damage repaired eg; any rotten, water damaged or perished timber roof battens are replaced.
  5. Existing battens are re-screwed.
  6. If metalconcrete or terra-cotta tiles are being removed, new 40 mm steel roof battens or hard-wood timber battens are installed prior to the new roofing being fitted. This is done because the existing batten size and spacing is usually inadequate for the new roofing to comply with building codes and manufacturer’s specifications
  7. As an option reflective foil insulation can be installed directly underneath the new roof to cool in summer & warm in winter as well as provide a condensation barrier.
  8. New BlueScope roofing is then installed, including all Ridge Capping, Barge Capping, Valleys, Gable Roll and Flashings. All ridge capping’s and barge flashings are scribed to ensure a water tight finish.
  9. New roof penetration collar seals (dektites) are installed around all vent pipes, flues, chimneys and other roof penetration structures..
  10. The new roof is cleaned off (swept, blown or hosed depending what is most suitable)
  11. Existing solar hot water units, skylights, roof vents, aerials etc are re-fitted onto the new roofing or new units installed.
  12. All rubbish is removed and the site is left clean, tidy and safe.
  13. Up to 30 year BlueScope product Warranty on the materials is available.
  14. Residential Roofing Solutions 12 Month Warranty on all Workmanship is provided.